Update Juniper L2c template to support VLAN-range

geant/gap_ansible/roles/l2circuits/templates/juniper/deploy/l2circuit.j2

 set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} description "SRV_L2CIRCUIT CUSTOMER {{ local_partner_name | upper }} {{ remote_partner_name | upper }} #{{ l2circuits_custom_service_name | replace(' ', '_') }} ${{ local_side.sbp.gs_id }}"
 set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} encapsulation vlan-ccc
-set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} vlan-id {{ l2circuits_vlan }}
 set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} family ccc
+{% if l2circuits_l2c_type == 'Ethernet' %}
+set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} vlan-id {{ l2circuits_vlan }}
 set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} input-vlan-map pop
 set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} output-vlan-map push
+{% elif l2circuits_l2c_type == 'VLAN' %}
+set interfaces {{ l2circuits_lag_name }} unit {{ l2circuits_vlan }} vlan-id-range {{ subscription.layer_2_circuit.vlan_range_lower_bound }}-{{ subscription.layer_2_circuit.vlan_range_upper_bound }}
+{% endif %}
 
 set protocols l2circuit neighbor {{ remote_side.sbp.edge_port.node.router_lo_ipv4_address }} interface {{ l2circuits_lag_name }}.{{ l2circuits_vlan }} virtual-circuit-id {{ l2circuits_l2c_vcid }}
 set protocols l2circuit neighbor {{ remote_side.sbp.edge_port.node.router_lo_ipv4_address }} interface {{ l2circuits_lag_name }}.{{ l2circuits_vlan }} control-word